Analysis of the Methodology of Introduction Into the Educational Process of Modern Technical Measuring Equipment Used in Production, as Well as Caliper Nutrometry and Measurement Methods
View article (English)

Avainsanat

elements of modification
physical calculation
sensor to a detectable value

Viittaaminen

Dilshodbek qizi, K. M., Oybek qizi, T. M., & Uzaqovich, T. M. (2021). Analysis of the Methodology of Introduction Into the Educational Process of Modern Technical Measuring Equipment Used in Production, as Well as Caliper Nutrometry and Measurement Methods. European Journal of Life Safety and Stability (2660-9630), 11, 176-179. Noudettu osoitteesta http://www.ejlss.indexedresearch.org/index.php/ejlss/article/view/240

Abstrakti

Methods and means of mass measurement in agriculture are of paramount importance. The accuracy of the measurement method is estimated by its error, and the presence of an error leads to significant losses during control. For example, grain weighing during harvesting is carried out on stationary automobile scales. Periodic verification of such scales is carried out at the place of their installation. The measurement error on the certified scales does not exceed one percent, but taking into account the fact that the scales are installed outdoors, they become dirty, corrode, and sometimes the weighing method is not followed. As a result, the measurement error increases significantly.

View article (English)

Lähdeviitteet

Shkaruba N.Zh. Theoretical foundations for calculating economic losses associated with control errors in repair production // Vestnik FGOU VPO MGAU 2005. No. 1 (11). pp. 34-37.

Shkaruba N.Zh. Development of a comprehensive methodology for the selection of measuring instruments of linear dimensions in the repair of agricultural machinery. Dis. ... Candidate of Technical Sciences. M., 2006. 156 p.

Leonov O.A., Antonova UY. The choice of universal measuring instruments for the control of cylinder liners during selective assembly // Tractors and agricultural machinery 2017. No. 6. pp. 52-57.

Shkaruba N.Zh. Calculation of probabilistic characteristics of the distribution of joints of mating parts. Certificate of registration of the computer program RUS2018610933. 27.11.2017.